JML-80 Vertial Colloid Mill

The main structures of colloid mill are grinding parts, the base transmission department and dedicated motor. The dynamic and still millstones in the core part and mechanical seal parts are the most key parts. Therefore, according to the different natures of the materials, the selection must be different.

Instruction Manual Colloid Mill

2020-6-30 · The outlet port is located in the cover of the mill. The mill must be fed with a pump. A Waukesha Cherry-Burrell positive displacement type pump is recommended. The capacity of the mill is 400 to 2000 gallons per hour (6.6 to 33.3 gallons per minute).

Usage and Maintenance of Colloid Mill Grinder

2021-11-23 · 14) Colloid mill during the winter season, when stopping running, the lower part of pump body must be drain off water, unscrew the screw, clean the medium to prevent the frost crack. 15) If colloid mill stopd for a long time, the pump must be opened entirely, dry moisture, rotating parts and junction are coated with grease, properly kept.

Petrochemical industry

2021-10-31 · PUC colloid mills - overview Colloid mill type O Vertical, enclosed motor, in-line and batch operation, seven sizes, up to 34,000 l/h Colloid mill type E Horizontal or vertical, in-line and batch operation, six sizes, up to 34,000 l/h Colloid mill type EL Horizontal, in-line operation, standard motors, eight sizes, up to 80,000 l/h

Colloid Mill

2021-11-11 · Colloid Mill working is suitable for Homogenizing, Emulsifying, Dispersing, Mixing, Comminuting of liquids to highly viscous products. It is based on the rotor-stator principle. It is available in plain as well as the Water Jacketed …

Upgrade your colloid milling operation

Use and operation of colloid mills. For years, colloid mills have filled the need of mixing applications that required greater shear than what traditional rotor/stator mixers could provide but for which high pressure homogenizers were overkill, both in terms of shear intensity and equipment cost.

Colloid mill Type EL

Probst & Class Colloid Mill Type E Colloid Mill Type E Probst & Class Probst & Class Colloid mill Type ELColloid mills Invented and built to last: PUC - synonymous with colloid mills for more than 90 years PUC colloid mills have a wide range of applications. They can always be used when it is necessary to grind substances precisely and with reproducible results at the same time as …

FrymaKoruma Mills

2015-8-12 · Toothed colloid mill (MZ) The principal application for toothed colloid mills is wet milling of fluids and high-viscosity suspensions and emul-sions. FrymaKoruma mills can be supplied with a range of colloid milling sets, enabling optimal tailoring to each product. The standard milling set is suitable for universal use. The coarse

Pharmaceutical machinery, machine for food processing …

2013-6-26 · Theory of Operation Function of PMS COLLOID MILL ® is to disperse, emulsify and reduce the size of solid particles into fine uniform particle size. It grinds, mixes and blends product in a more economical and faster way. Rate of …

Colloid Mills

2017-10-13 · Colloid Mills are especially designed for the production of colloidal solutions, or extremely fine emulsions and suspensions. The high tip speeds, combined with an extremely small shear gap, produces intense friction on the material being processed. The friction and shear that result is commonly referred to as wet milling.

Colloid Mill

2021-11-13 · COLLOID MILL APPLICATION & PROCESS Procedural Operation & Applications of Colloid Mill Machine. A colloid mill is a machine that is used to reduce the particle size of a solid in suspension in a liquid, or to reduce the droplet size of a liquid suspended in another liquid. This is done by applying high levels of hydraulic shear to the process ...

China Colloid Mill Machine Suppliers, Manufacturers ...

2021-12-13 · Vertical High Speed Colloid Mill. The micro nano suspension colloid mill is a vertical split structure, with precision parts, stable operation and noise below 73db. At the same time, German Bergman double face...

The function of colloid mill machine and way of using

2021-10-20 · Attentions of operation of colloid mill. 1) Connect the feeder or the feeding tube and the outlet or the discharging circulates tube. And then connect the cold water tube and drain pipe. 2) Install the power starter and equipped with Ammeter and indicator light. When the power is on, start the machine and distinguish the direction of motor.

SOP for Co-mill : Pharmaceutical Guidelines

2021-12-4 · 7.1.6. Wash all above parts inside, outside and screen with 20 liters of running tap water followed by 1 liter of 2% non ionic detergent solution using nylon scrubber. 7.1.7. Wash all above parts with 30 liters of potable water to remove detergent. 7.1.8. Finally, rinse all above parts with 50 liters of running purified water. 7.1.9.

sop for operation and cleaning of colloid mill

2020-10-11 · 1.0 Objective: To describe the procedure for operation and cleaning of colloid mill. 2.0 Scope: This procedure is applicable to colloid mill 3.0 Responsibility: Operator / Production Officer / Executive. 4.0 Accountability: Department Head shall be accountable for the compliance of the system. 5.0 Procedure: 5.1 Operation: 5.1.1 Check the cleanliness of the colloid ...

SOP on Operation of Colloid Mill

This procedure is applicable to operation of colloid mill at manufacturing facility of Pharmaceutical Industry. PROCEDURE: Ensure that area is cleaned as per SOP. Ensure that all the parts of colloid mill are cleaned as per SOP. Ensure mains are ''OFF'' and plug top is removed from socket. Diagram: Check that screws on rotor (3 in No.) are ...

JML-100 Vertical Colloid Mill

Characteristics of JML-100 Vertical Colloid Mill. 1.This Colloid Mill has such merit as follows: Well-designed, simple operation, low noise, easy servicing, small in size, corrosion resisting, wide-range use etc. The main parts of this machine are made of high grade stainless steel which is nonpoisonous and corrosion-proof.

CLEANING & OPERATION PROCEDURE FOR COLLOID MILL

2020-1-28 · Ensure that color solution is completely unloaded from the Colloid Mill. 5.1.2. Carefully remove the hopper assembly by unscrewing the respective nuts to washing area. 5.1.3. Wipe & clean the SS rotar and other parts with 2% Teepol solution using nylon brush. 5.1.4. Pass excess water to remove last traces of Teepol.

Peanut Butter Colloid Mill Structure and Advantages

2021-10-8 · Peanut Butter Machine is also known as peanut butter colloid mill has the characteristics of compact design, practical model, beautiful appearance, good seal, stable performance, convenient operation, simple decoration, durable, wide range of application, high production efficiency, etc., is the most ideal processing equipment for processing fine materials.

Colloid Mill, Pharmaceutical Machinery

Colloid mill is frequently used to increase the stability of suspensions and emulsions. Colloid mill can be also applicable for Continuous and re – circulating method of Operation. Colloid mill is also designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities ...

Working and Principle of colloidal Mill

2016-4-3 · Working of the Colloidal Mill. The material is placed into the mill though the inlet hopper. It is then passed through the narrow gap between the rotor and stator and thus reduced the fine particle size. A colloid mill is a hydraulic shear …

Juice and Pulp Extractor Machines | Pilotsmith India Pvt. Ltd.

Colloid mill. Colloid Mills are used for further grinding of sediments and fiber contents in the pulp, medicines etc to form a clear liquid. The product is processed by high shear, pressure & friction between the stator & rotor. It is also subjected …

Small Ketchup Sauce Colloid Mill Tomato Paste Making Mach…

2020-7-5 · 4. Colloid mill is used for grinding, dispersing and homogenizing of ointment, cream, gels, and high viscous fluids in one operation. Advantages of …

Colloid Mills

Easy to disassemble, only 7 basic parts; cleaning and inspection quick and easy; may also be cleaned in place. Longer bearing and seal life; shaft and bearing position independent of clearance adjustment; quieter operation. 3-A sanitary design for food and pharmaceutical processing. Flow rates: 6.7 to 33.3 gpm (25 to 126 l/m)

Colloid Mill and Colloid Mills Products (bituminous …

A colloid mill is one of the most important parts of the equipment used in the blending of bitumen emulsion products. It grinds bitumen down to particles of between 1 and 3 microns while blending it with an emulsifier solution.

Colloid Mill

2020-4-7 · The Waukesha Cherry-Burrell brand Colloid Mill produces controlled, highly sheared, uniform dispersions and stable emulsions made up of uniform globules of moderate fineness. A serrated conical stator and a serrated rotating cone make up the emulsifying head.

Probst & Class & Co. KG

2021-9-29 · PUC colloid mills - overview Colloid mill type O Vertical, enclosed motor, in-line and batch operation, seven sizes, up to 34,000 l/h Colloid mill type E Horizontal or vertical, in-line and batch operation, six sizes, up to 34,000 l/h Colloid mill type EL Horizontal, in-line operation, standard motors, eight sizes, up to 80,000 l/h

Chemineer :: Greerco Colloid Mills

2014-2-25 · The Greerco Colloid Mill is the most versatile high shear mixer available. With a simple turn of the wheel, you can achieve the process results you have been looking for. • The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel • Changing the gap setting allows the user to modify the shear rate

Working and Principle of colloidal Mill

2016-4-3 · Working of the Colloidal Mill. The material is placed into the mill though the inlet hopper. It is then passed through the narrow gap between the rotor and …

SOP for Operation and Cleaning of Colloid Mill

2020-1-5 · SOP for Operation and Cleaning of Colloid Mill 1.0 Purpose: The purpose of this SOP is to define the cleaning and operating procedure for Colloid Mill. 2.0 Scope: This procedure is applicable for the cleaning and operation of Colloid Mill used at the drug formulation plant. 3.0 References & Annexures: References: